Our range of products:
-
Cold spray, metal spraying, metal spraying technology, metal coatings, carbides, ceramics as protection against: corrosion, wear, oxidation, abrasion, heat, acids and alkalis
|
- Recovery of production damaged machine parts
|
- New parts‘ coating at defined positions to achieve required properties: e.g. ceramic coatings, carbide coatings as super-hard surface
|
- steel coatings: e.g. on axles, shafts, spigots
|
- Stainless steel coatings: e.g. for sliding fits, rolling bearing blocks
|
- Bronze alloys: e.g. for bearing cases, bushings
|
- Super-hard molybdenum layers: e.g. for the paper industry or hydraulic piston rods
|
- Ceramic materials: e.g. on pumps‘ shaft protection sleeves
|
- Pseudoalloys of mixtures of different materials for special applications
|
- Metal coatings on plastic materials: EMC
|
- Ceramic coatings on metals:
|
- Aluminium oxide, Titanium Oxide, Chromium oxide, Zirconium oxide for electrical insulation, heat, and wear protection
|
- Electric funcional coatings: silver, copper, brass, aluminium, tin
|
- Soldering materials on non conducting or unsolderable materilas
|
- Shielding through metal coatings on different materials, as well as plastic materials (EMC – electromagnetic compatibility)
|
- Contact materials on electric switching elements, copper coating, silver coating, tin coating, brass coating
|
- Decorative coatings: copper, brass, aluminium, stainless steel, silver, gold
|
- Degreasing of parts in our own metal parts washing plant
|
- Cleaning of parts in an ultramodern, ultrasonic washer
|
- Sand blasting of aluminium, steel or plastic parts, e.g. classic cars’ engines or other parts for restoration
|
|
|
|
Applications and benefits of thermal spraying:
|
Applications:
- Wear Protection
- Corrosion Protection
- Thermo Barriers
- Rubbing Wear
- Particle Erosion
- Grain Abrasion
- Electric Conductivity
- Electric Resistance
- High Temperature Protection
- Scrap Recovery
- Sliding Bearing Materials
- Chemical Strain
- Oxidising Atmosphere
- Emergency Running Properties
- Decorative Coatings
|
Advantages:
- Any material is coatable
- Any material is sprayable
- The coatable material doesn’t change thermally
- Any component and geometry can be coated
- Excellent automatization of thermal spraying processes is possible
- Flexible use
- Very good reproduction
- High dimension accuracy
- High quality standard
- Different elements exist in the sprayed coatings or can be combined (e.g. Cr, Ni, Carbides etc.)
|
Increase of productivity and efficiency of technical equipment and machines unavoidably raises segments’ and components’ wear. Therefore these heavy-duty and endangered surfaces must be protected by thermal spraying or altered in a way to withstand extraordinary strains. The general raw material shortage results in engine parts made of other raw materials being sufficiently available but which don’t meet the production’s requirements. These engine parts will get a suitable surface coating in order to protect the base material and meet the desired needs.
|
